Instant, effortless access to your water outdoors.

The Aquor House Hydrant is a revolutionary faucet system that makes access to your water easy and enjoyable. Aquor’s patented twist-lock design automatically turns the water on as soon as the connector is inserted. Stop wasting your time at the tap, and enjoy instant access to your water with none of the hassles of traditional hose bibs.


FORGET LEAKS & DRIPS

No more dripping faucets or wasteful leaks. Unlike conventional brass hose bibs, the Aquor House Hydrant uses water pressure itself to keep the valve closed, guaranteeing a leak-free outlet. Rather than rotating and compressing a rubber washer that wears with each use, the House Hydrant’s patented valve design opens and closes with virtually zero wear and tear for a watertight connection, every time.

NEVER WORRY ABOUT FROZEN PLUMBING

Quit using foam covers and dealing with shut-off valves. Forgetting to drain your outdoor faucet can result in severe flood damage if it freezes and bursts. Traditional hose bibs are made of brass, a poor insulating material that can easily freeze. Even “frost-free” outdoor faucets often fail when temperatures drop below 0°. The stainless steel House Hydrant insulates your plumbing up to 7x better than brass “frost-free” sillcocks, so the hydrant does not need to be covered any further. Winterizing is as simple as disconnecting.

NO MORE BRASS THREADS

Forget the hassle of scraping your knees and knuckles trying to thread on garden hoses. Instead of dealing with compact threads that are a pain to use with cold or wet hands, the Aquor connection system is easy and convenient to use. With Aquor, you can plug into your water outlet instantly. All it takes is a simple push and turn to engage the Aquor House Hydrant.

INSTANT CONVENIENCE

All it takes is a simple push and turn to engage the Aquor House Hydrant. Three grooves guide the connector into the right position, so it can be inserted blindly in any direction. Water flow automatically starts as soon as you connect, and stops instantly when you disconnect.

Aquor House Hydrant: Simply twist to connect - it's the easiest outdoor faucet ever.
Aquor House Hydrant: The world's best outdoor faucet system

  Leak-proof seal

Instant water-tight connection, every time.

  Frost-free to -30° F

Just unplug and go. No additional covers needed.

  Built to Last

Marine-grade steel & heavy-duty food-grade polymers.

SAVE WATER, SAVE TIME

Instant connections means less time wasted at the tap. Quick tasks like watering plants or washing the dog are now made effortless. And no annoying leaks and sprays – just water where you need it, when you need it.

BUILT TO LAST

We extensively test our products during research and development stages. The system has also been independently lab-tested to the following:

• Lifecycle: 5,000 connector engagements @ 125 psi
• Resistance to bending: 100 lbs lateral pressure to hose connector @ 125 psi
• Temperature range: -.6° F to 140°
• Endurance: 8 hrs x 10 @ 125 psi

Our in-house testing greatly exceeds these minimum requirements. 60,000 wear cycles, 200 lb stress tests, and freeze resistance below -30° F have been demonstrated.

Aquor House Hydrant: Built to last

EASY INSTALLATION

Installation is very similar to a standard sillcock. A universal 1/2″ NPT inlet allows you to connect to any plumbing type, and the 3/4″ Aquor connector attaches to any garden hose. The two-piece design makes rough-in a piece of cake, and all internals can be easily inspected or serviced in seconds. The House Hydrant does not require power and has only one internal moving part. 5 stem lengths available to match your wall depth.

HEAVY-DUTY, 100% LEAD-FREE MATERIALS

We use only the highest-quality, most-suitable materials for each product application. Many of our materials are most commonly used in the marine, aerospace, and automotive industries. Marine-grade, 100% lead-free 316L stainless steel provides better durability, rust resistance, and freeze protection than traditional brass hose bibs. Aquor hose connectors are NOT made of typical ABS plastic, but rather a special wear-resistant polymer called DuPont Delrin®. Instead of typical rubber washers, high-performance DuPont Viton® O-rings provide reliable seals. Hydrant covers are molded from ASA polymer for excellent weather and UV resistance.

SIMPLE SECURITY

Perfect for vacation or rental properties, unplugging the House Hydrant provides an instant leak-proof and tamper-resistant outlet, with no individual keys required. Simply store your garden hose with the Aquor connector away from the hydrant. The Aquor connector has a one-way valve, so you can drain your hose and bring it inside without it dripping.

HOW IT WORKS: WHY AQUOR IS BETTER THAN A BRASS SPIGOT


In a traditional hose bib, water flow is stopped with a soft rubber washer or metal disc which is screwed down to stop the flow. With repeated use, this type of seal is subject to wear and will eventually leak. The washer can be replaced and the valve seat resurfaced, but this type of valve can never be maintenance-free.

As a softer metal, brass threads can wear away as they are tightened, leading to leaks. Enough wear will leave the entire faucet and garden hose unusable and needing replacement.

The Aquor House Hydrant uses an O-ring system to ensure watertight connections. O-rings are renowned for their leak-proof sealing abilities, especially under high pressures. They are suitable for both static and dynamic seals. Easily accessible DuPont Viton® O-rings have been tested to withstand 10+ years of use. Aquor House Hydrants are vacuum-cast from stainless steel and experience virtually zero wear. The wear-resistant DuPont Delrin® connector is built to endure tens of thousands of engagements. When needed, replace just the connector and not the whole hydrant.

National Association of Homebuilders: IBS 2015 Award Winner



National Association of Home Builders
2015 IBS Best Outdoor Product Award


nahb.org


Aquor Builder Spotlight: Method Homes

“We like the Aquor hydrant for several reasons. Most importantly, the quality is top notch. It also provides a clean and modern aesthetic which our clients and designers greatly appreciate. Lastly, it solves a specific problem in the modular pre-fab industry of providing a hydrant that doesn’t greatly increase the width of the building footprint. Highly recommended!”


Keith Knutson – Method Homes



WHAT OUR CUSTOMERS ARE SAYING:

5 stars reviews on Amazon


ENJOY YOUR HOUSE HYDRANT? WANT TO ADD A SUGGESTION? SHARE YOUR FEEDBACK WITH OTHERS ON OUR AMAZON PAGES

PREVENT COSTLY LEAKS & WATER DAMAGE

Outdoor faucets are one of the most common sources of leaks for homeowners, yet often go unnoticed. Fixing a faulty hose bib can mean saving thousands of gallons of water annually. A leaky faucet that drips at the rate of one drip per second can waste more than 3,000 gallons per year. That’s the amount of water needed to take more than 180 showers!

In cold climates, hose bibs are one of the most common sources of water damage. Over a quarter million homes flood each year due to frozen plumbing plumbing bursting. If all outdoor faucets are not properly sealed, drained, and insulated, your home could be at risk. The stainless steel House Hydrant outperforms typical brass “frost-free” bibs by up to 7x in freezing temperatures, and self-drains automatically when you disconnect.

0+
Gallons per year a dripping hose bib wastes

(A SMALL LEAK AT ONE DRIP PER SECOND)


Source: IBM/ASCE

0
Homes flooded each year due to frozen pipes bursting

Source: State Farm

$0
Average homeowner loss per flooded home

Source: Insurance Info Institute

CHOOSE FROM 2 HYDRANT MODELS

Both models share the same connection system, materials, and hose connector. The House Hydrant V2 has an integrated vacuum breaker for ASSE-certified backflow protection.

Aquor House Hydrant V1

HOUSE HYDRANT V1
 

Available stem lengths: 4″, 6″, 8″, 10″, 12″
Available colors: Aquor Blue, Slate Gray
Inlet threading: 1/2″ NPT
Outlet threading (to garden hose): 3/4″ GHT
Recommended water pressure: 35-95 PSI (125 max)
Recommended for: Copper, PEX
Exterior siding compatibility: All siding types (for uneven surfaces, use a mounting block)
Backflow prevention: Single; one-way valve
Hydrant body and internals: 316L Stainless Steel
Connector: Dupont Delrin® (Acetal Resin Polymer)
Debris Cover: ASA Polymer
O-Rings: DuPont Viton® (Fluoropolymer)


SPECIFICATION SHEET

Aquor House Hydrant V2

HOUSE HYDRANT V2
WITH ATMOSPHERIC VACUUM BREAKER

Available stem lengths: 4″, 6″, 8″, 10″, 12″
Available colors: Aquor Blue, Slate Gray
Inlet threading: 1/2″ NPT
Outlet threading (to garden hose): 3/4″ GHT
Recommended water pressure: 35-95 PSI (125 max)
Recommended for: PEX
Exterior siding compatibility: All siding types (for uneven surfaces, use a mounting block)
Backflow prevention: Dual; one-way valve + atmospheric vacuum breaker
Hydrant body and internals: 316L Stainless Steel
Connector: Dupont Delrin® (Acetal Resin Polymer)
Debris Cover & Vacuum Breaker Cap: ASA Polymer
O-Rings: DuPont Viton® (Fluoropolymer)
Certified to ASSE 1019A

SPECIFICATION SHEET

WHICH HOUSE HYDRANT MODEL IS RIGHT FOR ME?

Both models share the same materials and hose connector. Whether or not you need a built-in vacuum breaker is based on your specific application. The V1 is better suited for retrofits and DIY projects, and has a smaller round faceplate. The V2 is intended for new construction and is certified to ASSE 1019A. The vacuum breaker provides full backflow protection with no reduction of water flow.

Ready to Install?

Order products directly from Aquor, or see an in-store demo at one of our retailer locations:


Where to Buy       Contact Us


To be notified when new Aquor products are released (we’ll never spam or sell your info):

PRO? Contact us today to get your hands on a demo hydrant.

AQUOR ACCESSORIES
Professional Installer?

House Hydrant - Outlines

Once you use a House Hydrant, you’ll never want to install a brass hose bib again.

Contact us today for a quote on your next project.

Get in touch