It's so clean and it does what they say it does. I have to say a bad thing or nobody will believe how good these hydrants are: I struggled to clip in a new fitting when the system was under pressure, so I'll shut off pressure if I need to change out fittings to avoid damaging them. That's like a twice a year thing for me. The 3/4" PEX-A attachment is the bomb (photo). After swapping out my old 1/2" copper with 3/4" PEX-A and installing this hydrant my outside GPMs went from 7.5 to 12. Compliment sandwich complete!

Installation was easy. Product seems good so far. Just make sure you have a valve on the hose connector or you will get soaked when connecting.

I bought 2 hot+cold hydrants and 2 V2+hydrants from Aquor, and 3 out of 4 of those worked perfectly but one of the V2's would drip constantly after disconnecting the hose connector. Customer service responded quickly and walked me through some troubleshooting steps to try and dislodge potential debris that might not be allowing the operating rod to close all the way, and after that didn't work, quickly shipped me a warranty unit at no cost. We were under construction, and getting a replacement unit immediately was important, and it arrived within days. Once we removed the "defective" unit, we see that it isn't defective at all but the plumber didn't follow the instructions, and used teflon tape which gummed up the mechanism!

5 stars for Aquor, 10 stars even
1 star for the plumber my GC hired

And my (very constructive) feedback: Aquor should put a large label on the hydrant itself, in both English and (more importantly) in Spanish, stuck to the hydrant in a way that hopefully forces someone to remove and read it before install, reminding them to not use teflon tape and that the o-ring built into the hydrant is sufficient to stop leaks, because nobody will read the manual. And I guess, never trust your contractor and watch everything they do, or... just do it yourself!

we purchased 5 of the matte black V2+ for our new construction home. Haven’t had a chance to actually use it but customer service has been fantastic.

Saw this a while back on a YouTube channel. Had a spigot leaking and I couldn't get it apart to replace the washer. Purchased the 12" stem as I was going through brick and concrete block. Installing it was very easy and no trouble at all. Yes, I installed it myself. It functions and looks great!

These hydrants are extremely well made. Love the fact there is no packing or turning handle that will leak over time. I’ve installed all four myself so not beyond the skills of a decent do-it-yourself homeowner.

I got my first Aquor faucet when I got tired of replacing “frost-free” hose bibs almost every year. After installing the first Aquor I was actually looking forward to the other two hose bibs failing. Fast forward two years and I just replaced my last hose bib with an Aquor. I’ll never use anything else, they’re so easy to use and so reliable. I’ll never again have the dread of cracking open a hose bib for the first time in the spring and watching the vacuum breaker leak water everywhere. Install pictures show the custom mounting block I made out of PVC trim.

So I don't know if you're looking at this product because of the solution of looking clean or because of how well it works. But regardless if there's any products out there that you can consider competition consider this brand because of their customer service. I own four and head an issue with a product that I believe my installer damaged and they covered it. Great customer service will recommend and buy in the future

I'm always on the lookout for cool stuff and this definitely fits that description! I started with one at my house and have since added 4 more.. Besides working great, they look a million times better than a traditional hose bib.. So if you have a nice house and like to have special details than this is for you.. The picture below is in my pool house, imagine a normal hose bib, it would be ugly!

Purchased the V2 for our new construction home. We we, nor our plumber, were familiar with Aquor, but I knew I wanted them! I chose the Gray polymer which is the least expensive option, and I was afraid it would look cheap. It doesn’t look cheap at all! I might upgrade to a more polished cover later, but this will work with our brick for now! Our plumber wasn’t intimidated with the install and commented on how neat it was! I can’t wait to start using them!

I purchased two Aquor Premium House Hydrant V2+ units in Brushed Stainless Steel, and I couldn't be happier with my decision. I really like the modern, clean design and the overall concept behind these hydrants. It's a nice upgrade from traditional outdoor faucets. I'm very pleased with my purchase and would definitely recommend Aquor to anyone considering upgrading their outdoor water connections.

Ended up choosing the brushed stainless steel cover version of this to withstand the insane Texas summer sun.

Even though V2+ is mostly advertised as meant for new construction, you can absolutely use these as a retrofit; you just need to open up your wall from inside the house to tear out your old bin and connect this new one.

Definitely recommend you find a YouTube install video for your plumber as these are not particularly common to most plumbers. Our plumber was impressed with the ingenious design and quality materials though.

We had three of these installed at my sister-in-law’s home in south Texas. After buying and returning several different sizes of the V2+ hydrant, we finally got all three installed and they are AWESOME!

Finding a plumber to install them was tricky as Aquor doesn’t really have an extensive network of installers recommended but we lucked out with a great plumber and even he was impressed with how well these are designed.

Aquor sells a bunch of pipe adapters depending on your wall depth and pipe material. These are 1000% better than traditional hose bibs.

Aquor really is the “Apple” of faucet hydrants bibs. Just go for it, it’s just such a nice architectural detail and convenience to have.

We've installed a lot of aquor hydrants.. but the black is where it's at. The metal cover is much preferred over the plastic in this Texas heat. The first we installed is a bit over 3 years old and nothing has chipped or rusted and thats a major win in my book. Each freeze they have preformed exactly as advertised. My kids loved the little icicle that shot out the bottom and no harm was done.

The hose hydrant v2+ has to be the slickest looking hose attachment available. Makes a traditional bib look beyond outdated, and it works flawlessly. Highly recommended.

These things are the cats meow! Appearance and functionality are awesome. Will be usingon every porject now. Thanks guys!!

Everything has been perfect. From ordering, delivery, to holding the product in hand. When I had some questions or concerns, the service has been iINCREDIBLE. Denzel took care of everything, was on it!

Product is well built, heavy, and packaged perfectly. They thought of every detail, and delivered.

I have worked in the homebuilding industry for 25+ years, and some products just go to the next level. This one is on that rare list. Great job Aquor, appreciate it!

With the addition of the all black metal unit and cover our customers gravitate towards these first, nice they come with the upgraded adapter with the shutoff too

Very nice well made fitting I had to build a box to mount it as I ordered 12"and should have gone for 10"
Arrived on time happy with purchase.

Good product overall. Best looking hose bib ever.

I have a small plumbing company that does primarily new custom home construction. We are doing a house on Fort Myers Beach that will replace a couple of houses that were totaled in hurricane Ian. As this building has three floors and numerous outside decks at all levels, we generally have Woodford type wall faucets located all over. Our home owner had originally had the architect specify recessed wall boxes for all 16 locations. Not an easy install in a concrete block and slipform building. He asked the GC and I to look into Aquor V2plus Hydrants in matte black. The installation was better than wall boxes, the powder coated stainless steel looks great and they are made extremely durable. At this point I am very happy we came across this product and intend to keep using it.I'll update you guys with some pics and more comments soon.

Great products, have used them on several homes that I have built in my clients seem to love them