I like that it is self draining, stainless steel ensures no corrosion. I like the way it looks, I had new siding installed on the house the old hose bibs had to be removed to accommodate the new siding, instead of reinstalling the old ones I choose to get the Aquor ones. I bought 2 12" lengths but I should have got one as a 10", 12" is a little too close to the floor joist so I have to figure out how to connect to existing copper piping without hitting the joist, even using a 90° elbow it's a close fit. I am using PEX tubing with adapters to copper. The 12" one I have installed and is working good. Overall happy with it .

I found Aquor via Home Renovision on Youtube. I figured it couldn't hurt to try and now I've installed one on two houses. I have another one planned to install on each of these home too. Happy customers, myself included.

I love the convenience and sleek look of the black V1 hydrant flush against my house. It works great and I show everyone and they want one now.

Very impressed about the quality of the hydrant. All stainless steel construction ordered with 1/2” pex B fitting. Very straight forward and easy to install. Water flow is much better than my old hydrant. Product is well packaged. Just the feel of it leads me to believe it will last a very long time.

Excellent product, easy install. I’m super impressed with the build quality and the simplicity of the design. I would definitely recommend this to anyone picking out fixtures. I will be purchasing more as my existing spigots need replaced.

I am extremely happy with our Aquor House Hydrant V1+! It's outstanding and I couldn't find anything like it on the market. It's evidently built from high quality materials that will last. We live in the UK with a brick house on a pedestrianised street so we didn't want a typical outdoor tap as people may be tempted to tamper with it. This one is very discreet and noone will know what it is. I'd highly recommend it! The only thing I will mention is that when we hired a plumber, it took him longer than anticipated to install it as it is a unique outdoor tap. Also, it didn't seem to work with an additional dual-check valve which the plumber ended up removing (so I'd mention this to your plumber to speed-up troubleshooting). However, this is not an issue as there is built-in backflow prevention within this unit and the hose attachments. Finally, I'd recommend buying the plastic Hozelock "threaded tap connector" size 26.5mm / 3/4", as the metal one did not fit the hose attachment.

Perfect solution for my home outdoor watering needs. Easy installation and great looking post install

Easy install , water tight , modern look.

The constant worry is over.. No more freezing hose bib, just a clean piece of steel.

I recently upgraded our home to the Aquor V1+ House Hydrant, and it has truly been a game changer for my home. One of the standout features is its freeze-proof design. Living in New England with it's harsh winters, I no longer have to worry about my outdoor faucet freezing and causing potential damage. This alone makes it a must-have for any homeowner in colder climates.

Another fantastic aspect of the Aquor V1+ is how it simplifies hose installations. The quick-connect system is incredibly user-friendly, making it easy to attach and detach hoses without any hassle. This has made my gardening and outdoor cleaning tasks much, MUCH more efficient and enjoyable.

Overall, the Aquor V1+ is an upgrade that every house needs. Its combination of durability, ease of use, and freeze-proof technology sets it apart from traditional outdoor faucets. If you’re looking for a reliable and convenient solution for your outdoor water needs, I highly recommend the Aquor V1+ House Hydrant.

Clean and sleek product, really like it. Just installed about a week ago myself. Used PEX to copper with Sharkbite fittings. Really pretty easy. Only have one thing that (so called) gave me a problem and have one item that I am curious about. The so called problem was that I couldn’t, initially, get the right angle fitting to point in the correct direction (down) once tightened, at the end of the hydrant. To loosen it to get it in the correct direction meant leaking. This was with the Aquor extra right angle fitting. So I purchased a Sharkbite right angle fitting and after turning it tighter than I would have liked — it was in the correct direction and was perfect. My one concern is that every time I disconnect the connector from the hydrant it makes a pressurized pop, not a big deal and I get it - just wasn’t expecting it. Or have I done something wrong. Tried looking at FAQ did t see anything about it, so I am guessing this is normal. Again, didn’t expect or see it in videos…. Again - overall GREAT item and will recommend it and install another!!!!

I have had 2 hose bibs bust in the same location during cold temperatures and am hoping that I will never have to change this hose bib out again. Having read reviews of the Aquor hose bibs, I am very hopeful! I am very happy with the installation. It went quite well. I recommend the 1/2” PEX Expansion 90° Elbow Inlet. You can rotate the elbow up to 360 degrees in order to line-up the elbow with the incoming water line. I did the install recently but have been using it with my 4 GPM pressure washer with no issues. I would not do an install without the trim plate either. The holes for attaching the hose bib to the brick are close to the 1 1/2" hole, which could cause break-out. The 4 holes for the trim plate are spaced far enough apart that there is no risk of this happening.

We built a new house in the hill country outside of Austin 6 years ago and all 4 of the outside hose bibs have frozen over literally every winter since, despite being covered with premium Styrofoam faucet covers. As an engineer I know that one or more of the faucets will burst at some point, which would no doubt drain our 31K gallon rainwater collection tank before we could act to contain it. Colie Curry at Hill Country Plumbing in Wimberly TX introduced me to the Aquor line of products and I knew in an instant that this was the perfect solution to our problem! It only took him about an hour to replace all 4 faucets and operation has been flawless ever since. And last but not least, the flush mount looks so much better and more modern than an ugly hose bib sticking out of your house!!

I purchased this hydrant for a New installation at Our Condo in Northwest Ohio. I completed the install myself and am happy with the looks and ease of use. I mounted the hydrant (Faucet) at a higher location than most typical exterior faucets so it’s easy to connect the insert without bending over. My immediate next door neighbor is 77 years Old and She lives alone. She asked Me what’s the Blue cover for on the outside wall that our garages joined? I showed Her How it worked and instructed Her how to hook and unhook it as well as how to relieve the pressure from the hose after unhooking it. She absolutely loved this device and I have ordered Her an adapter for Her hose so She can share in the convenience of using this style water hook up.
My Wife and I live in our primary Home 5 hours away in Kentucky, this Condo is our home away from home when We visit our two Grandsons in Ohio.
As exterior faucets fail or need replaced in Our Ky home this will be my go to replacement faucet. It’s so easy to install and I really like how neat the appearance is when not using.

I am so glad I purchased this hydrant. It looks awesome, works great, and is an upgrade for any homeowner. I know... .who gets excited about a hydrant? Our former spigot leaked and was loose. I had seen this option several times and decided to look further into it. I bought the V1+. This should become a standard component of every house. The built quality, warranty, aesthetic, and service are first class. I highly recommend this product.

Replaced a 40-year-old hose bib with a V1+ Hydrant and have no regrets about the purchase price or installation cost. Living in Western NY, I purchased the 12" stem for greatest reach inside the house to prevent possibility of freezing. I opted to have it professionally installed and it only took 1 hour to complete. The flush mount sleek design is really nice and the hydrant is easy to operate with no decrease in water pressure whatsoever.

I have been wanting to upgrade the curb appeal and functionality of my hose bibs on my house for a while. Found aquor house hydrants and wanted to try them out. After a long wait for me to actually pull the trigger and order them. I'm very happy with the craftsmanship and build of the product. Purchased 2 V1s for the front and rear of my house. Front on brick. Rear on siding. After some issues from install on my end I got them both functioning properly. Quick and easy set up. I did have to find some masonry anchors because they are not provided. (would be nice if that was included in the box, but not a deal breaker). I'm very happy so far. Installed in July so we shall see how they fair a mid Atlantic winter.