Contact us for help. Monday thru Friday 9AM-4PM PST.
1/2” NPT 90° Elbow Inlet
$17.99






1/2” NPT 90° Elbow Inlet
Replaces standard straight inlet with a 90° elbow. Shortens overall length of hydrant by 1/2″. Includes stainless steel valve reset spring. Positionable.
316L stainless steel. Can be positioned in any direction due to unique O-ring seal. Tighten fully, then back off to desired placement (up to 360°, 1 rotation). Compatible with all Aquor hydrants and outlets except ground hydrants.
Couldn't load pickup availability





Tech Specs
Compatibility | All Aquor hydrants except Ground Hydrant |
Inlet Threading | 1/2” NPT |
Outlet Threading | Unique to Aquor hydrants and outlets |
Material | Stainless Steel |
Warranty | Limited LIFETIME all stainless steel parts |
Installation
1. If applicable, remove existing hydrant inlet by unscrewing counterclockwise. Ensure the O-ring
on hydrant body is properly seated.
Note: DO NOT use Teflon tape on hydrant body threads. This may cause leaks. Teflon tape
should ONLY be used on plumbing connection (fitting) threads.
2. Attach elbow inlet to hydrant body by threading clockwise.
Note: The O-ring will keep a watertight seal up to 360° from full lock, up to 250 PSI. You may
rotate counterclockwise until it is positioned in the correct direction for installation.
Read more about the elbow inlet and it's purpose on our blog.