As simple as attaching to the Aquor outdoor spigot, attach the PEX water line, and crimp the clamp. No more leaks. No more excessive concerns about water line freezing due to the excess water coming out after detaching the hose. Life is good.

This works perfectly when you really have a tight space to work with and you want to conceal in the drywall.

Quick and easy install. Don't forget you need the expansion tool for this one.

Fit perfectly for my needs. Easy swap with straight inlet that comes with the V1 + hydrant. Expansion pex makes it easy.

Okay, so it’s great except for the fact it does not line up with rest of unit when tight. Preventing removal of valve through the mounting plate hole when in stucco/concrete block configuration. You’d be better off using the straight fitting as short as possible and use a PEX 90 and the adapt PEX into fitting. If the 90 had lined up with rest of valve…easily 5 stars

Worked perfectly for narrow wall space where normal straight supply connection was not possible.

I purchased this to solve a tricky installation in a crawlspace where space was limited and an elbow was needed. The elbow is made from the same high-quality stainless steel as the V1 Hydrant, and is very easy to install. Additionally, once hand tight, it can be rotated significantly to handle supply lines coming in from any direction without impacting the seal, Aquor had great installation videos that gave me confidence to do this installation myself. I'm very impressed with the company, its products and support.

This allowed for easy in wall connection.

Accidentally ordered the expansion version which can only be used with PEX A. Reordered the Crimp style needed for PEX B and everything is good

Excelente

Unable to use copper pipe directly into the hydrant. Made the installation very easy, and no leaks!

Received the pex-expansion adapter quickly, hand tightened as instructed, turned on the water supply and…no leaks! Works great! Wish there was an option to order the hydrant with the pex-expansion connection included instead of buying an additional piece. Satisfied overall.

The unusual construction of my house exterior wall did not permit running a water supply line in a straight line with the stem of the house hydrant. I needed to run a line to the stem at a right angle. Since I am not using copper pipe with sweat joints, I elected to use a push-to-connect connector with NPT threads on the other end to connect to the inlet. After preparing and screwing in the NPT into the inlet, I only had to push to connect the line to the other end of the NPT, and it works great. The inlet can be adjusted (if turned less than one turn) to align the inlet with the incoming water line. This makes installation so much easier.

But ensure you measure properly, compensating for depth of the angled base of the debris cover, the mounting plate, and the change in length of the stem when the standard inlet is removed and the elbow inlet is installed. The measurements will be different than the regular thickness of your wall, and the length to the inside edge of the elbow inlet will be shorter than the listed length of the stem.

(AND THE CUSTOMER SERVICE IS GREAT!!!)

Works great. A definite must for PEX pipe install. Keeps you from having a extra point for a leak, and makes a nice clean install.

Good spigot upgrade

As advertised, screwed it in with about three wraps of tape and it was in. No leaks. I recommend it.

Since the V2+ version is for NEW construction - most of which is done with PEX these days - the PEX inlets should be INCLUDED with the hydrants. Not happy about having to buy them separately and having unused NPC inlets sitting around, expensive waste.

Everything from Aquar has been very high-quality and this elbow Pex expansion fitting is no exception. I highly recommend this one or the straight for PEX expansion.

Construction great did not use yet

I bought a few of these, along with various Aquor hydrants. They seem to work exactly as expected and advertised.