ADDED TO CART CUSTOMER ALSO BOUGHT
Replaces standard straight inlet with a 90° elbow. Shortens overall length of hydrant by 1/2″. Includes stainless steel valve reset spring. Positionable.
316L stainless steel. Can be positioned in any direction due to unique O-ring seal. Tighten fully, then back off to desired placement (up to 360°, 1 rotation). Compatible with all Aquor hydrants and outlets except ground hydrants.
Connect Aquor hydrants to 1/2″ PEX in seconds. Designed for use with 1/2″ PEX tubing and crimp ring fittings. Slide your PEX line over the fitting, then clamp the crimp ring to achieve a permanent, water-tight seal.
This elbow inlet can be positioned in any direction due to unique O-ring seal. Tighten fully, then back off to desired placement (up to 360°, 1 rotation). Compatible with all Aquor hydrants and outlets except Ground Hydrants.
Connect Aquor Hydrants to 1/2″ PEX in seconds. Designed for use with 1/2″ PEX tubing and crimp ring fittings. Slide your PEX line over the fitting, then clamp the crimp ring to achieve a permanent, water-tight seal.
Compatible with all Aquor hydrants and outlets except Ground Hydrants.
Aquor’s House Hydrant was selected by pme and can be found under the “latest products” section of the magazine.
Aquor Water Systems featured in PM Engineer Magazine
