Test Fitment & Alignment


Test your new hydrant’s fitment. Keeping the Aquor logo down, ensure the hydrant will line up correctly with the water supply line, then mark the position of the three mounting holes in the faceplate. The included debris cover and wedge will keep the hydrant sloped downward at a 5 degree angle.


Aquor House Hydrant Installation: Testing Fitment
Aquor House Hydrant Installation: Testing Fitment

Make sure the debris cover can operate smoothly and with full range of motion. Use a philips driver to adjust the tension on the friction hinge. If you can’t get the House Hydrant faceplate perfectly level on the first try, don’t worry. The rear valve housing is designed to keep a watertight seal up to 180° from full lock.

House Hydrant Rear Valve Housing