

CUSTOMER ALSO BOUGHT
Replaces standard straight inlet with a 90° elbow. Shortens overall length of hydrant by 1/2″. Includes stainless steel valve reset spring. Positionable.
316L stainless steel. Can be positioned in any direction due to unique O-ring seal. Tighten fully, then back off to desired placement (up to 360°, 1 rotation). Compatible with all Aquor hydrants and outlets except ground hydrants.
Connect Aquor hydrants to 1/2″ PEX in seconds. Designed for use with 1/2″ PEX tubing and crimp ring fittings. Slide your PEX line over the fitting, then clamp the crimp ring to achieve a permanent, water-tight seal.
This elbow inlet can be positioned in any direction due to unique O-ring seal. Tighten fully, then back off to desired placement (up to 360°, 1 rotation). Compatible with all Aquor hydrants and outlets except Ground Hydrants.
Connect Aquor Hydrants to 1/2″ PEX in seconds. Designed for use with 1/2″ PEX tubing and crimp ring fittings. Slide your PEX line over the fitting, then clamp the crimp ring to achieve a permanent, water-tight seal.
Compatible with all Aquor hydrants and outlets except Ground Hydrants.